Custom modular buildings make sense when a standard module cannot meet the site, the use or the approval: an odd-shaped block, a specific room mix, a planning requirement on appearance, or a building class with its own rules. Standard modules make sense when the layout repeats and the site is open and accessible. Most projects sit in between, using a standard structural frame with a custom layout, finish and facade.
This page is for builders, developers, councils, operators and community housing providers across Australia. The problem is that “custom” is often taken to mean slow and unpredictable, while “standard” is taken to mean plain and basic. Neither is right. The real question is how much of the design must change to suit your project, and when it is settled.
When custom makes sense
- The site is tight or irregular. Module sizes have to suit the block, the road route and the crane.
- The use is specific. Childcare, aged care and clinics have room relationships and fittings a standard plan does not provide.
- Planning sets the look. Councils may require roof forms, materials or setbacks that change the module.
- The class has its own rules. Class 3 and 9c buildings carry fire separation and access requirements that shape the layout.
- The building joins something existing. Extensions to schools, community halls or offices need modules matched to what is there.
When standard modules make sense
- Repeated rooms, such as workforce accommodation, motel rooms or cabins.
- Site offices, amenities and crib rooms.
- Small housing groups using one or two home types.
- Open, flat sites with good truck and crane access.
See modular site offices and modular cabins for holiday parks for common repeat types.
What EcoPrestige supplies
EcoPrestige supplies engineered structural steel volumetric modules, built and inspected in an offsite factory. The frame is engineered to suit each project, so layout, openings, finishes and facade can change without starting from nothing. Early involvement matters most on custom work: our early contractor involvement service lets your builder and consultants test module sizes against the site before drawings are finished.
EcoPrestige coordinates the module design with your consultants; permit drawings are issued by the registered or licensed practitioner the state requires. In Victoria, homes are contracted by our sister company DST Project Management and Construction Pty Ltd, registered domestic builder CDB-U 72187.
What does not fit
Some designs fight the method. Curved walls, very large spans, deep cantilevers and big column-free halls are usually better built on site, or as a hybrid with modules for the repeat rooms only. Late changes after production starts are costly in any factory. If a design needs so many one-off modules that nothing repeats, we will say so.
The approval path
Custom or standard, the approval follows the class and the state. Homes are typically Class 1a, offices Class 5, childcare Class 9b and aged care Class 9c, each confirmed by your building surveyor. Who signs the structure and who issues the approval depends on the state, so confirm with your building surveyor or certifier. Our building permit guide for modular buildings covers the steps.
The programme
Custom work needs more time at the front, while layout, engineering and approvals are settled. After that, the factory builds while the builder prepares the site, the same as for standard modules. Factory and site work run in parallel, so time on site is shorter. The key is freezing the design before production.
What to send us
- 1. The site address, survey and any planning controls.
- 2. The use and expected NCC class.
- 3. A room schedule or concept drawings.
- 4. What must be custom and why.
- 5. Your builder, consultants and target dates.
Testing a site first? Read modular feasibility before site acquisition.
Custom and standard modules: questions
What is a custom modular building?
A building made of modules sized and laid out for one project, rather than taken from a standard plan. The frame is engineered for that project and site.
Are custom modules harder to approve?
No. Approval follows the building class and the state, not whether modules are custom. Settle the design before production to avoid rework.
Can a standard module have a custom finish?
Yes. Many projects use a standard frame with custom layout, finishes and facade.
When should I choose a site-built option instead?
When the design has curved walls, very large spans or few repeated spaces. A hybrid with modules for repeat rooms can also work.
How is a custom modular building priced?
The supply price is quoted for your site once the layout, specification and access are known.
Not sure if your project needs custom modules?
Send the site, the use and any drawings to prebuilt@ecoprestige.com.au or download our technical brochures.
Related: custom modular buildings.