EcoPrestige Prebuilt

Do You Need an Architect for an Office Building in ACT? (2026 Guide)

Developers, builders and organisations planning an office in Canberra or the wider ACT ask the same question early: is an architect required? In the ACT, building design is not a licensed activity, so the law does not force you to engage an architect for a typical office. The engineer, energy assessor and surveyor are another matter. This page sets out who must sign in the ACT and where modular office supply fits.

The short answer for the ACT

Building design is not licensed in the ACT. That means a registered architect is optional for most office buildings. Some clients still want one for a town centre site or a design review panel, and that is reasonable.

Other roles are regulated. Structural design is by a registered professional engineer under the Professional Engineers Act 2023. Energy assessment is by a licensed building assessor. A licensed building surveyor certifies. Confirm with your building surveyor or certifier before you lock in the team.

Why modular fits a Canberra office

Canberra has steady demand for modest offices: agency annexes, community organisations, health and training rooms, and site offices that become permanent. These buildings repeat the same rooms many times, which suits volumetric modules.

The ACT also has a busy public housing build. Region Canberra reported 450 public homes in the 2026-27 Budget. When builders are stretched across housing, a building that arrives largely finished needs fewer trades on site. Our Canberra modular construction page covers the local market.

What EcoPrestige supplies

EcoPrestige supplies engineered structural steel volumetric modules, built and inspected in an offsite factory. An office package typically covers module structure, floors, walls, roof, services rough-in and finishes to the agreed specification. Your builder holds the head contract and runs the site, footings, crane lift and connections.

Our commercial modular buildings guide explains how builders and developers use module supply on commercial jobs.

What does not fit

  • Offices needing large open floors without columns.
  • Buildings taller than a few levels, where a site-built frame is simpler.
  • Sites without crane or truck access to the set-down area.
  • Projects that expect design changes once factory work has started.

The approval path in the ACT

EcoPrestige coordinates the module design with your consultants; permit drawings are issued by the registered or licensed practitioner the state requires.

In the ACT that means a registered professional engineer for structure, a licensed building assessor for energy and a licensed building surveyor for certification. Offices are typically Class 5, confirmed by your building surveyor. Development approval is a separate step where the lease and zone need it. Confirm with your building surveyor or certifier what they need for the module engineering and factory records.

Read our page on building permits and surveyor inspections for modular for the usual inspection points.

The programme

Footings, services and civil works go ahead on site while modules are built and inspected in the factory. Factory and site work run in parallel, so time on site is shorter. Canberra winters can slow wet trades, and a building finished under cover reduces that exposure. The surveyor’s inspections at the factory and on site are agreed before production starts.

What to send us

  • 1. Block and section, or the site address.
  • 2. Office use, headcount and amenity needs.
  • 3. Any concept drawings or a lease brief.
  • 4. Your engineer, surveyor and assessor, if engaged.
  • 5. The date you need the building occupied.

If the site is not yet secured, our page on modular feasibility before site acquisition shows how to test the block first.

FAQ: architects and office buildings in the ACT

Is an architect required for an office in the ACT?
Not for a typical office. Building design is not licensed in the ACT. Structural design, energy assessment and certification are regulated. Confirm with your building surveyor or certifier.

Who must sign the structural design?
A registered professional engineer under the Professional Engineers Act 2023.

Who certifies an ACT office?
A licensed building surveyor, with energy assessment by a licensed building assessor.

Does EcoPrestige act as the designer?
No. EcoPrestige coordinates the module design with your consultants; permit drawings are issued by the registered or licensed practitioner the state requires.

What NCC class is an office?
Typically Class 5, confirmed by your building surveyor.

Planning an office in the ACT?

Send the site, the use and any drawings to prebuilt@ecoprestige.com.au or download our technical brochures.

Related: modular office buildings.

Looking to rebuild your coastal home?

Contact our team to bring your vision to life.