Build-to-rent developers and their builders are carrying a large pipeline as at 28 October 2026. BDO reports 51,000 apartments worth $40.1bn: 24,855 in Victoria, 17,465 in NSW and 6,301 in Queensland. Most are high-rise. The problem on those towers is not the frame. It is the slow, trade-heavy fit-out of hundreds of identical bathrooms and services zones floor after floor.
Where modular fits in BTR
Whole volumetric buildings do not suit most of this pipeline, because the towers are too tall. Modular fits as parts of the building instead:
- Bathroom pods. Finished bathrooms built and inspected in the factory and lifted into place.
- Repeat components. Elements that recur on every floor, where the design allows them to be built offsite.
- Low-rise BTR. Smaller townhouse or walk-up BTR schemes in outer areas, where whole modules can work.
Why pods suit BTR
A BTR owner keeps the building. Every bathroom must perform for years under the same operator. Factory-built pods are made to one standard and inspected before they leave, which gives the owner consistent wet areas and fewer defects at handover. The builder removes several wet trades from each floor, which frees up the lifts and the hoist for other work. Our modular build to rent page covers the operator view.
There is also a handover benefit. Pods arrive with their own inspection record, so defects are found at the factory bench rather than during the final walk-through, when fixing them means working around tenants moving in.
What EcoPrestige supplies
- Engineered structural steel volumetric modules, built and inspected in an offsite factory.
- Bathroom pod and repeat component scopes where the design suits; we confirm early if a scope is not one we supply.
- Coordination of pod design with your consultants, including services and waterproofing details.
- A delivery schedule matched to the builder’s floor cycle.
We supply under the builder’s head contract. See our supply-only model for builders.
What does not fit
Pods need a repeat layout. A tower with many unique apartment types gains little. Pods also need to be fixed into the design early, because slab set-downs and service risers are set around them. If the structure is already designed without pods, the change may cost more than it returns.
The approval path
The building class is set by your building surveyor, so confirm it early. In NSW, WA, SA, the ACT and the NT, EcoPrestige coordinates the module design with your consultants; permit drawings are issued by the registered or licensed practitioner the state requires. In NSW, apartment buildings need a registered design practitioner and a registered engineer until the 2026 Act commences. In Victoria, structural design is by a PERA-registered structural engineer and a registered building surveyor issues the permit. In Queensland, permit drawings are issued under a QBCC licensed building designer. Confirm with your building surveyor or certifier.
The programme
Pods are built in the factory while the structure goes up. Factory and site run in parallel, so time on site for fit-out is shorter. Deliveries follow the floor cycle so each level receives its pods when the slab is ready. Our early contractor involvement service is the best way to fix pods into the design before the structure is locked.
What to send us
- 1. The project location and storeys.
- 2. The apartment mix and bathroom types.
- 3. Structural drawings or the current design stage.
- 4. The builder and floor cycle, if known.
- 5. Hoist and crane details.
Build to rent and modular components: questions
How big is the build-to-rent pipeline?
BDO reports a pipeline of 51,000 apartments worth $40.1bn, with 24,855 in Victoria, 17,465 in NSW and 6,301 in Queensland.
Can a whole BTR tower be modular?
Most of the pipeline is high-rise, so modular usually fits as components and bathroom pods rather than whole buildings.
Where do bathroom pods help most?
In repeat apartment layouts where the same bathroom appears many times, so it can be built and inspected in the factory and lifted in.
Who issues permit drawings for a BTR building?
In NSW, WA, SA, the ACT and the NT, EcoPrestige coordinates the module design with your consultants; permit drawings are issued by the registered or licensed practitioner the state requires.
How is pricing given?
Supply price quoted for your site, once we have the pod or module schedule and the delivery details.
Working on a build-to-rent project?
Send the site, the use and any drawings to prebuilt@ecoprestige.com.au or download our technical brochures.