Modular tourism accommodation means motel wings, holiday park cabins, eco cabins and resort villas built as structural steel modules in an offsite factory while the builder prepares the site. For a regional operator the point is the opening date: the rooms are made in parallel with the footings and services, so the time the site is a construction zone stays short. As the manufacturer, EcoPrestige is responsible for every module: built and inspected in an offsite factory to Australian engineering and QA, then delivered to site.*
The regional tourism brief builders are being handed
- Motel wing extensions: a block of rooms added to an existing motel, single or two storey, usually NCC Class 3
- Cabin groups: freestanding one and two bedroom cabins on a holiday or caravan park; classification depends on use and the allotment and is confirmed by the building surveyor
- Eco cabins: smaller units on sensitive sites where minimal ground disturbance and a short site programme matter most
- Resort villas: larger, higher specification units where the finish tier drives cost more than the structure
What they share is a hard opening date. A regional operator earns much of the year in a handful of peak weeks, so a build that runs into the season costs the season. See modular cabins for holiday parks and caravan parks and modular accommodation and motel buildings.
Supply price
Supply price is quoted for your site. Our published commercial rates are $2,200/m2 for childcare and school buildings, $2,300/m2 for apartments, motels, cabins and caravan parks, and $3,300/m2 for hotels, plus GST, and they apply only with a 2,400 mm ceiling and a site within 40km of the Melbourne port; any other project is requoted, never scaled. Rates cover module supply and the documentation pack; land, planning, site works, footings, services, freight, crane and loose furniture are priced separately by the builder. The full cost stack is in our modular construction cost guide.
Programme: the season is won or lost at design lock
On a modular build the rooms are made while the builder completes the site works, so the two biggest blocks of time run side by side instead of end to end. That only holds if the design is locked early, because design lock commits the factory slot. Work back from the opening date:
- Opening date the operator needs
- Commissioning, fit-off and the occupancy permit from the building surveyor
- Installation, connections and weather-tight on site
- Factory production and inspection
- Design lock, evidence of suitability and building permit
The actual programme depends on approvals, the design and the site. Stage durations are in our modular construction timeline guide.
Where regional accommodation briefs are coming from
- Great Ocean Road and the Grampians (VIC): long drive corridors with high peak occupancy and thin local trades
- Yarra Valley (VIC): winery and event demand with weekend peaks year round
- Bay of Fires and the east coast (TAS): remote sites where site programme length drives cost
- Kangaroo Island (SA): island logistics where every week on site is expensive
For hotels and resorts see the modular hospitality construction hub.
Class 3 or cabin: settle it before design lock
Classification drives fire separation, egress, accessibility and energy requirements. Motel wings are generally Class 3, with fire and sound separation between rooms and accessible room provisions. Cabins are usually Class 1 buildings, but the exact classification depends on use and the allotment, and the building surveyor confirms it in writing. The compliance pathway for each module is set out in the evidence of suitability pack.
Who is responsible for what
- EcoPrestige: structural steel modules, the evidence of suitability pack, factory inspection records and install sequence coordination
- Builder: head contract with the operator, permits, site works, footings, services, crane, installation and the path to the occupancy permit
That split keeps one party accountable on site. See our builder-facing supply page.
Checklist for builders pricing a regional motel or cabin job
- Confirm the opening date and work the programme back to design lock
- Get the classification confirmed by the building surveyor in writing
- Confirm wind region, BAL and soil classification for the site
- Check transport access for module sizes and the crane position
- Price site works, footings and services separately from module supply
- Write the supply and install scope split into the head contract
Related: modular tourism buildings in Ararat and the Grampians
Frequently asked questions
What is modular tourism accommodation?
Motel wings, holiday park cabins, eco cabins and resort villas built as structural steel modules in an offsite factory while the builder prepares the site, then delivered, lifted and connected.
Is a modular motel Class 3 under the NCC?
A motel wing providing short-term accommodation is generally Class 3. Cabins are usually Class 1 buildings, but the exact classification depends on use and the allotment and is confirmed by the building surveyor before design lock.
What does modular motel or cabin supply cost?
Supply price is quoted for your site. Our published rate for motels, cabins and caravan parks is $2,300/m2 plus GST, only with a 2,400 mm ceiling and a site within 40km of the Melbourne port; any other project is requoted. Site works, footings, services, freight and crane are priced separately.
Who installs the modules?
The builder holds the head contract, permits, site works and installation. EcoPrestige supplies the modules and the documentation pack and coordinates the install sequence with the builder.
Get the builder pack
Builders pricing a regional motel or cabin expansion: get the builder pack, or send the site, the room count and the opening date to prebuilt@ecoprestige.com.au. Send your enquiry first so you’re fully informed.
*Rules vary by state. Design and building work is carried out by the licensed or registered practitioner your state requires.